Is a 3D Printed Bio-Green Car in your future?

Credit: Jim Norman for The New York Times Caption: Ginger Gordon fills the tank of the 2001 VW Jetta with fresh  soybean oil.

Credit: Jim Norman for The New York Times Caption: Ginger Gordon fills the tank of the 2001 VW Jetta with fresh soybean oil.

by Jeremy Griffith
The American Millennium Online

My favorite media personality was illustrating a point on his show yesterday about how far we’ve come technology wise and what his vision or prediction of the future will be. Radio and Television star Glenn Beck utilized a fleet of cars, old and new to show the progress we’ve made just in the realm of transportation.

It’s a disturbing fact and maybe you’ve noticed it that cars of the past used to be so simple that someone with rudimentary skills could understand and repair or service their own vehicle. No longer. Now the highest end cars have so much complicated technology that only a specialist can work on it, and at great cost too.

Glenn Beck sees this as an unfortunate turn of events. He’s on the fence in regards to technology, nostalgic about the past but hopeful for the future. With technology like this, he said, no one will be able to understand or even tinker with their cars or their basic technology, like the high priest or priestess, we will be beholden to the mechanic or technical subject matter expert, Beck said.

I disagree. I see a different future. While many who are wealthy may want the hands off, don’t mess with the settings future, many  more I believe won’t be able to afford that lifestyle and will try to go backwards for more affordable and manageable outcomes. I think technology will help them do that, so there is no need to convert to being Amish. Let me illustrate.

Glenn demonstrated with a newly minted 1911 .45 pistol, the results of 3D printing, fully made of metal and capable of use on the firing range. Amazing. It used to be a short time ago where 3D printing only came up with cheap looking useless toys made from plastic polymer. No longer, now you have a real metal gun that fires .45 cal ammo, just like a normal gun would. Politicians are calling these ghost guns are already making move s to ban them, even though there is no proof that a printed gun is more likely to be involved in a crime than a over the shelf firearm.

The applications are enormous and could revolutionized manufacturing in the United States and the world. A man in Japan was arrested created his own fully functioning fire arm from plans he adapted on the Internet. The applications go far beyond the personal liberty of creating your own fire arms however. I foresee a future in which the customer builds his own car with the help of subject matter experts.

Imagine a new car company unbeholden to the unions, where the employees own the company and where they help you manufacture your own car from scratch to your specifications. Maybe you want a small replica of a Mini-cooper. You’d even like to pick the color. A technician helps you build the design and loads the data into the computer. Then the 3D printer fires up. A metal framework for the car, with plastic printed body parts that will never rust. Maybe you want a carbon fiber exterior? Great.

Now fit it together on the assembly line. Don’t just stand there! With the help of a robotic arm and a helpful technician, you are helping to rivet your machine together.

Now comes the engine, a specially designed engine melding the past with the future, uncomplicated and easy for the owner operator to maintain. It drops right in and bolts in to the chassis. I prefer mine to be a diesel engine. The car will run on a mixture of cooking oil and diesel. The diesel tank will be used to start the motor, then after fifteen minutes,  when the cooking oil is warmed up, the driver switches tanks. How much does the cooking oil cost to run? $0! So now I have a little green car that’s good for the environment and easy on my wallet. Restaurateurs will be only too happy to part with their used cooking oil for free since it would cost them money to dispose of it normally. I hope you like a car that smells like freshly cooked French Fries!

This may be a bit of a stretch and it is, but not much. My former co-worker Beth has owned two cars that have had this type of diesel/cooking oil operating system. Now she has to buy an old beater sedan or truck take runs on diesel. She doesn’t care about how it looks, she just wants a runner that gets her to work and back. What if there was a car company that could give her a new car that does exactly what she wants it to do, and looks nice at the same time! A company out in Milwaukee will outfit her with the system, she just has to supply the car. Sure it costs her $3,500 or so to install, but when you bought your car for less than $8,000, who cares?!

Instead of recycling that old car and going through the extra hoops to get it outfitted, what if there was a company that could do it all cheaper and more efficiently right in one location? Wouldn’t that be great.  I envision such an entrepreneurial endeavor the not so distant future. F-you car companies!

How often have you bought a car at great expense with a huge loan only to hear years later  that it was a recallable death trap that the union oppressed car companies didn’t bother to tell you about. Abandon those overpriced, taxpayer bailed out disasters and go with a company that actually serves the consumer needs. Have it your way isn’t a slogan just for hamburgers any more.

What if you wanted a car with a more retro-look, like that classic muscle car you had, or lusted after when you were a kid. Now you can. Just load the specifications into the computer and Whalah! Want something more futuristic? No problem.  We have that too.

Something go wrong with your car that you can’t figure out. We’ll come get your car, pull it in to the shop and sort it out together. Eli Whitney designed the assembly line to make manufacturing easier. The unions used it to destroy manufacturing, over engineer vehicles and pay themselves $75 an hour to put in a single rivet. Now you will be able to assemble your own car with a little help form a trained SME.

You see, capitalism, real capitalism, with always find a way to get around the system.  Crony capitalists will hire expensive lobbyists to bribe congressmen and women to get their public funding. A real capitalist will find a need and fill it, employing people in useful work and rewarding them for their effort. Eventually with companies like the one I’ve just described will create a shadow economy that is below the radar of traditional socialistic, crony capitalistic governments. Why do we need to pay taxes when we get no benefit from their “services”. Small enclaves will sprout up world wide of like minded people who want to be left alone, immune from the power hungry governments that tax and spend their economies to death.

In a future column, I intend to show how the Internet, in a similar Libertarian vain, will revolutionize education, freeing the parent and students from the failing socialistic government schools we see today.

In the meantime, envision a world where technology is freeing, where 3D printing will help the consumer solve their personal needs. Veterans will get new 3D printed limbs, a bike manufacturer will come up with an inexpensive pedal assist motor, helping the customer avoid high gas taxes and intrusive government taxes, a teacher will help struggling students in a home far away from her office with the help of the internet. Eventually there will be a separate Internet created that is privately owned, maybe several, that will be outside the reach of any overzealously intrusive government.

So there is hope for the future, not a dystopic  Ayn Rand kind of future, but a brave new world where the entrepreneur defeats the power hungry bureaucrat, using hard work and technology.

Do you find this post useful, informative or entertaining? How about helping us produce more stories you like. Messages us on Facebook and donate to DIY journalism. Send us tips on stories you would like covered. Visit our website and comment or donate now at AmericanMillenniumOnline.com.

Glenn Beck talks about 3D Printing

http://www.glennbeck.com/2015/01/05/how-fast-does-the-world-change-look-at-what-this-3d-printer-can-do/

3D Printed guns

http://www.wired.com/2014/05/3d-printed-guns/

Glenn Beck Talks about the amazing future.

http://www.theblaze.com/stories/2015/01/05/beck-uses-four-remarkable-vehicles-to-show-americans-what-he-believes-the-future-will-bring/

Information on Grease Cars.

https://greasecar.com/products

http://www.goldenfuelsystems.com/

Visit the American Millennium Online, explore the stories and donate to DIY journalism tailored to your interests.

https://www.facebook.com/AmericanMillenniumOnline

http://www.americanmillenniumonline.com/

Share This: